12 Volt Linear Actuators Different Size Strokes and Features

What Are the Common Sizes of 12 Volt Linear Actuators?

12-volt linear actuators come in various sizes to accommodate different applications and requirements. The size of a linear actuator is typically defined by its stroke length, which is the distance the actuator can extend and retract. Common stroke lengths for 12-volt linear actuators include:

2-Inch Stroke: Linear actuators with a 2-inch stroke are suitable for applications where a relatively short linear motion is required.

4-Inch Stroke: Actuators with a 4-inch stroke provide a moderate extension/retraction length and are commonly used in applications where a bit more travel is needed.

6-Inch Stroke: Linear actuators with a 6-inch stroke offer a longer range of motion and are used in applications requiring a more extended linear movement.

8-Inch Stroke: Actuators with an 8-inch stroke provide even more extended linear motion and are suitable for various applications.

12-Inch Stroke: Linear actuators with a 12-inch stroke are used when a relatively long extension and retraction are necessary.

18-Inch Stroke: Actuators with an 18-inch stroke are considered long-stroke linear actuators and are suitable for applications requiring substantial linear motion.

24-Inch Stroke and Beyond: For applications demanding an even more extended range of motion, there are linear actuators with stroke lengths of 24 inches and beyond.

It's important to note that these are general categories, and the specific stroke lengths available for 12-volt linear actuators can vary between manufacturers. When selecting a linear actuator for your application, consider the required stroke length, load capacity, speed, and any other relevant specifications to ensure it meets your specific needs. If you have a particular application in mind, it's advisable to consult with the JIECANG manufacturer to find the most suitable linear actuator for your requirements.

12 Volt DC Electric Linear Actuator Features

12-volt DC electric linear actuators are versatile devices used for converting electrical energy into linear motion. Here are common features associated with these actuators:

1.Voltage: These actuators operate on a 12-volt DC power supply, making them suitable for various applications and compatible with standard electrical systems.

2.Stroke Length: The stroke length represents the distance the actuator can extend and retract. 12-volt DC electric linear actuators are available in different stroke lengths to accommodate various requirements.

3.Load Capacity: Actuators come with specified load capacities, indicating the maximum force they can exert or support. Choosing an actuator with an appropriate load capacity is crucial for the intended application.

4.Speed: The speed of the linear actuator is measured in inches per second (IPS) or millimeters per second (mm/s). Speed may vary based on the specific model and application requirements.

5.Built-in Limit Switches: Many actuators include built-in limit switches to automatically stop the actuator when it reaches the fully extended or retracted position, preventing damage.

6.Feedback Sensors: Some advanced electric linear actuators feature feedback sensors like potentiometers or encoders, providing precise position feedback for accurate control.

7.Mounting Options: Linear actuators come with various mounting options, including clevis mounts, trunnion mounts, and foot mounts, facilitating flexible installation in different configurations.

8.Duty Cycle: The duty cycle represents the percentage of time an actuator can operate without overheating. It's important to consider the duty cycle, especially for applications requiring continuous or frequent operation.

9.Weather Resistance: Certain models may be designed to be weather-resistant or waterproof, allowing outdoor use or operation in harsh environments.

10.Control Options: Electric linear actuators can be controlled through various methods, including manual control, remote control, or integration with automated control systems. Some actuators may support Bluetooth or Wi-Fi control.

11.Compact Design: Many 12-volt DC electric linear actuators are designed to be compact and lightweight, facilitating easy integration into different systems.

12.Quiet Operation: Electric linear actuators often operate quietly, making them suitable for applications where noise is a consideration.

Before selecting a 12-volt DC electric linear actuator, carefully review the specifications to ensure they align with the requirements of the intended application. Manufacturers or suppliers can provide additional information and assistance in choosing the right actuator for specific needs.

12 Volt Linear Actuator Waterproof Features

Waterproof 12-volt linear actuators are designed to withstand exposure to moisture and environmental conditions, making them suitable for outdoor or wet environments. Here are features commonly associated with waterproof 12-volt linear actuators:

IP Rating: The Ingress Protection (IP) rating indicates the level of protection against solid particles and liquids. For waterproof linear actuators, a high IP rating is essential. Common IP ratings for waterproof actuators include IP65, IP66, and IP67, where the first digit represents protection against solids, and the second digit represents protection against liquids.

Sealed Housing: Waterproof linear actuators typically have sealed housing to prevent water ingress. The housing is designed to protect the internal components from exposure to rain, splashes, or other environmental factors.

Corrosion-Resistant Materials: Actuators designed for outdoor or wet environments often use corrosion-resistant materials for their construction. Stainless steel or aluminum components can resist corrosion, ensuring the longevity of the actuator.

Rubber Seals and Gaskets: Seals and gaskets play a crucial role in preventing water from entering the internal components. Waterproof linear actuators are equipped with high-quality rubber seals and gaskets to create a barrier against moisture.

Coated Electronics: The electronic components within the actuator are often coated with protective materials to safeguard them from water exposure. This coating adds an extra layer of protection against potential damage.

Breather Vent or Drainage System: Some waterproof actuators include features like breather vents or drainage systems. These mechanisms allow any moisture that may enter the housing to exit, preventing the buildup of condensation.

UV Resistance: Linear actuators intended for outdoor use are often designed to resist UV radiation, ensuring that prolonged exposure to sunlight does not degrade the materials or compromise performance.

Tested for Water Resistance: Reputable manufacturers subject their waterproof linear actuators to rigorous testing for water resistance. This testing ensures that the actuators meet the specified IP rating and can withstand the intended environmental conditions.

Before selecting a waterproof 12-volt linear actuator, it's crucial to check the product specifications and ensure that the actuator meets the IP rating and environmental requirements of the application. Manufacturers or suppliers can provide guidance on the suitability of their actuators for specific conditions.

About JIECANG 12 Volt Linear Actuators

JIECANG is a leading manufacturer of linear motion and actuation solutions, including a range of 12-volt linear actuators. Here is information about JIECANG's 12-volt linear actuators:

Voltage Compatibility: Our12-volt linear actuators are designed to operate efficiently with a 12-volt DC power supply. This voltage is common and ensures compatibility with various applications.

Stroke Length Options: We provide a variety of stroke length options for their 12-volt linear actuators. Users can choose the specific stroke length that aligns with the requirements of their application, whether it's a shorter or longer extension/retraction distance.

Load Capacity: Our 12-volt linear actuators come with specified load capacities, indicating the maximum force they can exert or support. Users can select an actuator based on the load requirements of their specific application.

Built-in Limit Switches: Many JIECANG linear actuators include built-in limit switches. These switches automatically stop the actuator when it reaches the fully extended or retracted position, preventing damage and ensuring precise control.

Feedback Sensors: Some advanced models may feature feedback sensors, such as potentiometers or encoders, providing accurate position feedback. This feature enhances control and monitoring capabilities.

Duty Cycle: Our linear actuators are designed with a specific duty cycle, representing the percentage of time the actuator can operate without overheating. It's crucial to consider the duty cycle for applications with continuous or frequent operation.

Weather Resistance: Depending on the model, our 12-volt linear actuators may be designed to be weather-resistant or waterproof. This feature is beneficial for applications in outdoor or harsh environments.

Control Options: JIECANG offers various control options for their linear actuators, allowing users to integrate them into different systems. This may include manual control, remote control, or compatibility with automated control systems.

Compact and Lightweight Design: Our 12-volt linear actuators are often designed to be compact and lightweight, making them suitable for applications with space constraints.

Quiet Operation: The actuators from JIECANG typically operate quietly, ensuring that noise is minimized in applications where it's a consideration.

For specific details about our 12-volt linear actuators, including available models, specifications, and customization options, it is recommended to contact our customer support for the most accurate and up-to-date information.